Preferred file formats:
.stl .sldprt .iges (.igs) .step (.stp)
Accura® 25: durable, off-white, PP-like
Accura® 60: rigid, transparent, PC-like
Accura® Xtreme: durable, gray, ABS/PP-like
Accura® Xtreme White 200: durable, white, ABS-like
Accura® Bluestone: Exceptional stiffness, High temp resistance, High humidity resistance
Somos® 8120: semi-flexible, milky white, PE-like
Polyamide--PA: low moisture absorption, white, nylon
Glass Filled--GF: temperature resistance, grey, 30% glass-filled nylon
Alulon: machinable, metallic grey, PA & aluminum powder blend
SLA Finish Levels
Unfinished -- Supports removed, no sanding
Level 1 -- Supports removed, sanded & light bead blast of support faces
Level 2 -- Supports removed, sanded & bead blast entire part
Level 3 -- Sand to 320 removing all accessible layer lines so it's ready to prime/paint
Level 4 -- Sand to 600 wet. Required when parts are to be plated or to enhance transparency (Accura 60).
SLS Finish Levels
Level 1 -- Excess powder removed & lightly bead blasted
Level 2 -- Excess powder removed, lightly bead blasted, sanded & sealed to promote an even surface
We recommend a Finish Level 3 for the following paint options: Primer, Paint, Soft Touch, Texture, & Dye.
We recommend a Finish Level 4 for the following paint options: Dye, Clear Coat, & Plating.
If you have a question, call or email us, to get the answer you need and keep your project moving forward.
Request a Quote
Please provide as much information as you can, such as the quantity, the type of material, and any other important information you think we will need to know. Items marked with an * are required. If you are unsure which process should be used to build your parts, let us know the intended use so that we can help you select the appropriate process. If you have .jpgs, .bitmaps, or .pdfs that would help us understand your needs, feel free to include them as well.
If you are experiencing problems with the form, Please contact us at (608) 437-1400 to discuss your project.
Emails up to 30MB can also be sent to RFQ@midwestproto.com
After uploading, you will see a message that your file submission was successful.